1130.6—Requirements for format of registration forms.
(a) Size of form.
The form shall be at least the size of two standard post cards connected with perforation for later separation, so that each of the two portions is at least 3 1/2 inches high by 5 inches wide by 0.007 inches thick.
(b) Layout of form.
(1)
General. The form shall consist of four parts: Top and bottom, divided by perforations for easy separation, and front and back.
(2) Top of form.
The top portion of the form is to be retained by the consumer. The front top portion shall provide the purpose statement set forth in § 1130.7(a). The back of the top portion shall provide the manufacturer's contact information as required in § 1130.7(b).
(3) Bottom of form.
The bottom portion of the form is to be returned to the manufacturer. The bottom back panel of the form shall have blocks for the consumer to provide his/her contact information as required in § 1130.7(c). Below the consumer contact information shall be product information as required in § 1130.7(d) which may be printed on the form or provided on a pre-printed label placed on the form by the manufacturer. The front of the bottom portion of the form shall be pre-addressed and postage-paid with the manufacturer's name and mailing address where registration information is to be collected.
(c) Font size and typeface.
The registration form shall use bold black typeface. The size of the type shall be at least 12-point for the purpose statement required in § 1130.7(a) and no less than 10-point for the other information in the registration form. The title of the purpose statement shall be in all capitals. All other information shall be in capital and lower case type.