10.8—Articles exported for repairs or alterations.

(a) Except as otherwise provided for in this section and except in the case of goods covered by § 181.64 of this chapter, the following documents shall be filed in connection with the entry of articles which are returned after having been exported for repairs or alterations and which are claimed to be subject to duty only on the value of the repairs or alterations performed abroad under subheading 9802.00.40 or 9802.00.50, Harmonized Tariff Schedule of the United States (HTSUS):
(1) A declaration from the person who performed such repairs or alterations, in substantially the following form:
I,________, declare that the articles herein specified are the articles which, in the condition in which they were exported from the United States, were received by me (us) on ________, 19__, from________ (name and address of owner or exporter in the United States); that they were received by me (us) for the sole purpose of being repaired or altered; that only the repairs or alterations described below were performed by me (us); that the full cost or (when no charge is made) value of such repairs or alterations are correctly stated below; and that no substitution whatever has been made to replace any of the articles originally received by me (us) from the owner or exporter thereof mentioned above.
(Date)
(Address)
(Signature)
(Capacity)
(2) A declaration by the owner, importer, consignee, or agent having knowledge of the pertinent facts in substantially the following form:
I, _____,
declare that the (above) (attached) declaration by the person who performed the repairs or alterations abroad is true and correct to the best of my knowledge and belief; that the articles were not manufactured or produced in the United States under subheading 9813.00.05, HTSUS; that such articles were exported from the United States for repairs or alterations and without benefit of drawback from ________ (port) on ________, 19__; and that the articles entered in their repaired or altered condition are the same articles that were exported on the above date and that are identified in the (above) (attached) declaration.
(Date)
(Address)
(Signature)
(Capacity)
(b) The port director may require such additional documentation as is deemed necessary to prove actual exportation of the articles from the United States for repairs or alterations, such as a foreign customs entry, foreign customs invoice, foreign landing certificate, bill of lading, or an airway bill.
(c) If the port director concerned is satisfied, because of the nature of the articles or production of other evidence, that the articles are imported under circumstances meeting the requirements of subheading 9802.00.40 or 9802.00.50, HTSUS, and related section and additional U.S. notes, he may waive submission of the declarations provided for in paragraph (a) of this section.
(d) The port director shall require at the time of entry a deposit of estimated duties based upon the full cost or value of the repairs or alterations. The cost or value of the repairs or alterations outside the United States, which is to be set forth in the invoice and entry papers as the basis for the assessment of duty under subheading 9802.00.40 or 9802.00.50, HTSUS, shall be limited to the cost or value of the repairs or alterations actually performed abroad, which will include all domestic and foreign articles furnished for the repairs or alterations but shall not include any of the expenses incurred in this country whether by way of engineering costs, preparation of plans or specifications, furnishing of tools or equipment for doing the repairs or alterations abroad, or otherwise.

Code of Federal Regulations

[T.D. 94-47, 59 FR 25567, May 17, 1994, as amended by T.D. 95-68, 60 FR 46361, Sept. 6, 1995]