1060.810—What materials does this part reference?
Documents listed in this section have been incorporated by reference into this part. The Director of the Federal Register approved the incorporation by reference as prescribed in 5 U.S.C. 552(a) and 1 CFR part 51. Anyone may inspect copies at the U.S. EPA, Air and Radiation Docket and Information Center, 1301 Constitution Ave., NW., Room B102, EPA West Building, Washington, DC 20460 or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(a) ASTM material.
Table 1 to this section lists material from the American Society for Testing and Materials that we have incorporated by reference. The first column lists the number and name of the material. The second column lists the sections of this part where we reference it. Anyone may purchase copies of these materials from the American Society for Testing and Materials, 100 Barr Harbor Dr., P.O. Box C700, West Conshohocken, PA 19428 or http://www.astm.com. Table 1 follows:
| Document number and name | Part 1060reference |
|---|---|
| ASTM D471-06, Standard Test Method for Rubber Property—Effect of Liquids (“ASTM D471”) | 1060.515 |
| ASTM D2862-97 (Reapproved 2004), Standard Test Method for Particle Size Distribution of Granular Activated Carbon (“ASTM D2862”) | 1060.240 |
| ASTM D3802-79 (Reapproved 2005), Standard Test Method for Ball-Pan Hardness of Activated Carbon (“ASTM D3802”) | 1060.240 |
| ASTM D4806-07, Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel (“ASTM D4806”) | 1060.501 |
| ASTM D5228-92 (Reapproved 2005), Standard Test Method for Determination of Butane Working Capacity of Activated Carbon (“ASTM D5228”) | 1060.801 |
(b) SAE material.
Table 2 to this section lists material from the Society of Automotive Engineers that we have incorporated by reference. The first column lists the number and name of the material. The second column lists the sections of this part where we reference it. Anyone may purchase copies of these materials from the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096 or http://www.sae.org. Table 2 follows:
| Document number and name | Part 1060reference |
|---|---|
| SAE J30, Fuel and Oil Hoses, June 1998 | 1060.515 |
| SAE J1527, Marine Fuel Hoses, January 1993 (Issued 1985-12, Revised 1993-02) | 1060.515 |
| SAE J2260, Nonmetallic Fuel System Tubing with One or More Layers, November 2004 | 1060.510 |
| SAE J2659, Test Method to Measure Fluid Permeation of Polymeric Materials by Speciation, December 2003 | 1060.801 |
(c) California Air Resources Board material.
Table 3 to this section lists material from the California Air Resources Board that we have incorporated by reference. The first column lists the number and name of the material. The second column lists the sections of this part where we reference it. Anyone may obtain copies of these materials from California Air Resources Board, Haagen-Smit Laboratory, 9528 Telstar Avenue, El Monte, CA 91731-2990 or http://www.arb.ca.gov. Table 3 follows:
| Document number and name | Part 1060reference |
|---|---|
| Final Regulation Order, Article 1, Chapter 15, Division 3, Title 13, California Code of Regulations, July 26, 2004 | 1060.105, 1060.240 |
(d) American Boat and Yacht Council Material.
Table 4 to this section lists material from the American Boat and Yacht Council that we have incorporated by reference. The first column lists the number and name of the material. The second column lists the sections of this part where we reference it. Anyone may purchase copies of these materials from the American Boat and Yacht Council, 613 Third Street, Suite 10, Annapolis, MD 21403 or http://www.abycinc.org/. Table 4 follows:
| Document No. and name | Part 1060 reference |
|---|---|
| ABYC H-25, Portable Marine Gasoline Fuel Systems, July 2010 | 1060.105 |