CFR > Title 40 - Protection of Environment > CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY > SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS (Parts 400–471) > PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY > SUBPART H—Wet Digestion Reclaimed Rubber Subcategory (§428.80 to §428.86) > 428.85—Standards of performance for new sources.

428.85—Standards of performance for new sources.

The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of product)
COD 14.7 6.11
Oil and grease 0.40 0.144
TSS 1.04 0.52
pH (1) (1)
English units (lb/1,000 lb of product)
COD 14.7 6.11
Oil and grease 0.40 0.144
TSS 1.04 0.52
pH (1) (1)
1 Within the range 6.0 to 9.0.
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of product)
COD 14.7 6.11
Oil and grease 0.40 0.144
TSS 1.04 0.52
pH (1) (1)
English units (lb/1,000 lb of product)
COD 14.7 6.11
Oil and grease 0.40 0.144
TSS 1.04 0.52
pH (1) (1)
1 Within the range 6.0 to 9.0.