437.44—Effluent limitations attainable by the application of the best available technology economically achievable (BAT).
        
        (a) 
         Except as provided in  40 CFR 125.30 through 125.32 or 437.40(b), any existing facility subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of BAT set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:
    
    
        
        (1) 
         The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in paragraphs (b), (c), (d) or (e) of this section;
    
    
        
        (2) 
         The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in  § 437.41(a) ;
    
    
        
        (3) 
         The discharger will submit to its NPDES permitting authority a periodic certification statement as described in  § 437.41(b) once a year; and
    
    
        
        (4) 
         The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in  § 437.41(c).
    
    
        
        (b) Combined waste receipts from subparts A, B and C of this part.
        
        (1) 
         Limitations for the following parameters are the same as the corresponding limitation specified in  § 437.42(b)(1) :
    
    Organic parameters
        Acetone
        Acetophenone
        bis (2-ethylhexyl) phthalate
        2-Butanone
        Butylbenzyl phthalate
        Carbazole
        o-Cresol
        p-Cresol
        n-Decane
        Fluoranthene
        n-Octadecane
        Phenol
        Pyridine
        2,4,6-trichlorophenol
        Metal parameters
        Antimony
        Arsenic
        Cadmium
        Chromium
        Cobalt
        Copper
        Lead
        Mercury
        Nickel
        Silver
        Tin
        Titanium
        Vanadium
        Zinc
    
        
        (2) 
         The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in  § 437.42(b)(2).
    
    
        
        (c) Combined waste receipts from subparts A and B of this part.
        
        (1) 
         Limitations for the following parameters are the same as the corresponding limitation specified in  § 437.42(c)(1) :
    
    Organic parameters
        Bis (2-ethylhexyl) phthalate
        Butylbenzyl phthalate
        Carbazole
        n-Decane
        Fluoranthene
        n-Octadecane
        Metal parameters
        Antimony
        Arsenic
        Cadmium
        Chromium
        Cobalt
        Copper
        Lead
        Mercury
        Nickel
        Silver
        Tin
        Titanium
        Vanadium
        Zinc
    
        
        (2) 
         The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in  § 437.42(c)(2).
    
    
        
        (d) Combined waste receipts from subparts A and C of this part.
        
        (1) 
         Limitations for the following parameters are the same as the corresponding limitation specified in  § 437.42(d)(1) :
    
    Organic parameters
        Acetone
        Acetophenone
        2-Butanone
        o-Cresol
        p-Cresol
        Phenol
        Pyridine
        2,4,6-trichlorophenol
        Metal parameters
        Antimony
        Arsenic
        Cadmium
        Chromium
        Cobalt
        Copper
        Lead
        Mercury
        Nickel
        Silver
        Tin
        Titanium
        Vanadium
        Zinc
    
        
        (2) 
         The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in  § 437.42(e)(2).
    
    
        
        (e) Combined waste receipts from subparts B and C of this part.
         Limitations for the following parameters are the same as the corresponding limitation specified in  § 437.42(e) :
    
    Organic parameters
        Acetone
        Acetophenone
        Bis(2-ethylhexyl) phthalate
        2-Butanone
        Butylbenzyl phthalate
        Carbazole
        o-Cresol
        p-Cresol
        n-Decane
        Fluoranthene
        n-Octadecane
        Phenol
        Pyridine
        2,4,6-trichlorophenol
        Metal parameters
        Arsenic
        Cadmium
        Chromium
        Cobalt
        Copper
        Lead
        Mercury
        Tin
        Zinc
    Code of Federal Regulations
        
        (a) 
         Except as provided in  40 CFR 125.30 through 125.32 or 437.40(b), any existing facility subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of BAT set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:
    
    
        
        (1) 
         The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in paragraphs (b), (c), (d) or (e) of this section;
    
    
        
        (2) 
         The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in  § 437.41(a) ;
    
    
        
        (3) 
         The discharger will submit to its NPDES permitting authority a periodic certification statement as described in  § 437.41(b) once a year; and
    
    
        
        (4) 
         The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in  § 437.41(c).
    
    
        
        (b) Combined waste receipts from subparts A, B and C of this part.
        
        (1) 
         Limitations for the following parameters are the same as the corresponding limitation specified in  § 437.42(b)(1) :
    
    Organic parameters
        Acetone
        Acetophenone
        bis (2-ethylhexyl) phthalate
        2-Butanone
        Butylbenzyl phthalate
        Carbazole
        o-Cresol
        p-Cresol
        n-Decane
        Fluoranthene
        n-Octadecane
        Phenol
        Pyridine
        2,4,6-trichlorophenol
        Metal parameters
        Antimony
        Arsenic
        Cadmium
        Chromium
        Cobalt
        Copper
        Lead
        Mercury
        Nickel
        Silver
        Tin
        Titanium
        Vanadium
        Zinc
    
        
        (2) 
         The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in  § 437.42(b)(2).
    
    
        
        (c) Combined waste receipts from subparts A and B of this part.
        
        (1) 
         Limitations for the following parameters are the same as the corresponding limitation specified in  § 437.42(c)(1) :
    
    Organic parameters
        Bis (2-ethylhexyl) phthalate
        Butylbenzyl phthalate
        Carbazole
        n-Decane
        Fluoranthene
        n-Octadecane
        Metal parameters
        Antimony
        Arsenic
        Cadmium
        Chromium
        Cobalt
        Copper
        Lead
        Mercury
        Nickel
        Silver
        Tin
        Titanium
        Vanadium
        Zinc
    
        
        (2) 
         The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in  § 437.42(c)(2).
    
    
        
        (d) Combined waste receipts from subparts A and C of this part.
        
        (1) 
         Limitations for the following parameters are the same as the corresponding limitation specified in  § 437.42(d)(1) :
    
    Organic parameters
        Acetone
        Acetophenone
        2-Butanone
        o-Cresol
        p-Cresol
        Phenol
        Pyridine
        2,4,6-trichlorophenol
        Metal parameters
        Antimony
        Arsenic
        Cadmium
        Chromium
        Cobalt
        Copper
        Lead
        Mercury
        Nickel
        Silver
        Tin
        Titanium
        Vanadium
        Zinc
    
        
        (2) 
         The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in  § 437.42(e)(2).
    
    
        
        (e) Combined waste receipts from subparts B and C of this part.
         Limitations for the following parameters are the same as the corresponding limitation specified in  § 437.42(e) :
    
    Organic parameters
        Acetone
        Acetophenone
        Bis(2-ethylhexyl) phthalate
        2-Butanone
        Butylbenzyl phthalate
        Carbazole
        o-Cresol
        p-Cresol
        n-Decane
        Fluoranthene
        n-Octadecane
        Phenol
        Pyridine
        2,4,6-trichlorophenol
        Metal parameters
        Arsenic
        Cadmium
        Chromium
        Cobalt
        Copper
        Lead
        Mercury
        Tin
        Zinc