CFR > Title 49 - Transportation > SUBTITLE B—Other Regulations Relating to Transportation > CHAPTER II—FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (Parts 200–269) > PART 230—STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS > SUBPART C—Steam Locomotives and Tenders (§230.66 to §230.116) > 230.70—Safe condition.

230.70—Safe condition.

(a) Pre-departure inspection. At the beginning of each day the locomotive is used, the steam locomotive operator shall ensure that:
(1) The brakes on the steam locomotive and tender are in safe and suitable condition for service;
(2) The air compressor or compressors are in condition to provide an ample supply of air for the locomotive service intended;
(3) The devices for regulating all pressures are properly performing their functions;
(4) The brake valves work properly in all positions; and
(5) The water has been drained from the air-brake system.
(b) Brake pipe valve required. Each steam locomotive shall have a brake pipe valve attached to the front of the tender, the rear of the back cab wall, or adjacent to the exit of a vestibuled cab. The words “Emergency Brake Valve” shall be clearly displayed near the valve.