§ 2314. Innovative technology
(a)
 Use 
The Secretary shall, whenever feasible, seek to promote long- and short-term cost savings, increased efficiency, reliability, and safety, and improved environmental results through the use of innovative technology in all phases of water resources development projects and programs under the Secretary’s jurisdiction. To further this goal, Congress encourages the Secretary to—
(1)
use procurement and contracting procedures that encourage innovative project design, construction, rehabilitation, repair, and operation and maintenance technologies;
(2)
frequently review technical and design criteria to remove or modify unnecessary impediments to innovation;
(b)
 Accelerated adoption of innovative technologies for management of contaminated sediments 
(1)
 Test projects 
The Secretary shall approve an appropriate number of projects to test, under actual field conditions, innovative technologies for environmentally sound management of contaminated sediments.
(2)
 Demonstration projects 
The Secretary may approve an appropriate number of projects to demonstrate innovative technologies that have been pilot tested under paragraph (1).
(c)
 Reports 
Within 2 years after November 17, 1988, and thereafter at the Secretary’s discretion, the Secretary shall provide Congress with a report on the results of, and recommendations to increase, the development and use of innovative technology in water resources development projects under the Secretary’s jurisdiction. Such report shall also contain information regarding innovative technologies which the Secretary has considered and rejected for use in water resources development projects under the Secretary’s jurisdiction.
(d)
 “Innovative technology” defined 
               	 	
               	 	
For the purpose of this section, the term “innovative technology” means designs, materials, or methods which the Secretary determines are previously undemonstrated or are too new to be considered standard practice.