CFR > Title 30 - Mineral Resources > CHAPTER II—MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR > SUBCHAPTER B—OFFSHORE (parts 250 to 285) > PART 250—OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF > SUBPART S—Safety and Environmental Management Systems (SEMS) (§250.1900 to §250.1929) > 250.1902—What must I include in my SEMS program?

250.1902—What must I include in my SEMS program?

You must have a properly documented SEMS program in place and make it available to BOEMRE upon request as required by § 250.1924(b).
(a) Your SEMS program must meet the minimum criteria outlined in this subpart, including the following SEMS program elements:
(1) General (see § 250.1909 )
(2) Safety and Environmental Information (see § 250.1910 )
(3) Hazards Analysis (see § 250.1911 )
(4) Management of Change (see § 250.1912 )
(5) Operating Procedures (see § 250.1913 )
(6) Safe Work Practices (see § 250.1914 )
(7) Training (see § 250.1915 )
(8) Mechanical Integrity (Assurance of Quality and Mechanical Integrity of Critical Equipment) (see § 250.1916 )
(9) Pre-startup Review (see § 250.1917 )
(10) Emergency Response and Control (see § 250.1918 )
(11) Investigation of Incidents (see § 250.1919 )
(12) Auditing (Audit of Safety and Environmental Management Program Elements) (see §§ 250.1920 )
(13) Recordkeeping (Records and Documentation) and additional BOEMRE requirements (see § 250.1928 ).
(b) You must also include a job safety analysis (JSA) for OCS activities identified or discussed in your SEMS program (see § 250.1911(b) ).
(c) Your SEMS program must meet or exceed the standards of safety and environmental protection of API RP 75 (incorporated by reference as specified in § 250.198 ).